TileMaster Satin Wax Dressing

TileMaster Satin Wax Dressing is an ideal surface sealer to protect natural stone and give a wonderful satin finish.  Available in 1L and 5L.

 

The Wax Dressing is perfect for use on:

Unpolished Marble & Limestone

Quarry Tiles

Granite Tiles

Any Absorbent Stone

By using the TileMaster Protection system, tiles will have an excellent and strong surface barrier which helps make maintenance easier.

 

Warning: Does not protect stone from acid or chemical damage, surface wear of scratching.  Does not protect against oil.

 

 

Where to Use

 

Perfect for use on floors, walls, splitface tiles or anywhere indoors to protect natural stone.  Not suitable for wet areas or outdoors.

 

 

Benefits

Enhances the natural appearance of surface and gives a satin shine.

Low odour and does not give off unpleasant smells.

Protects, enhances and maintains tiles in one solution.

Easy to apply and ready-to-use.

HIghly resistant.

Aids maintenance and makes it easier to clean floor.

 

Coverage (rate per 1 Litre per coat):

Stone & Quarry Tiles: 15-25sqm

High Absorbent Stone: 8-12sqm

Floor Preservation and Ongoing Maintenance: Surfaces treated with Satin Wax Dressing, should be maintained with TileMaster Cleaner No. 2, diluted at 1:50 (1 cap in 5 litres of water).  For upkeep, the wax can be diluted with 200ml of water in 1 litre of water and applied to the floor using a mop.  This will revitalise the floor.

 

A Safety Data Sheet is available below for download/viewing.