TileMaster All in One Honed Solvent Sealer

TileMaster All in One HonedSolvent Sealer is perfect to protect Honed and Unpolished natural stone.  Gives excellent protection against both oil and water based stains.  Protects and seals both indoor and outdoor surfaces.  Easy to apply and ready to use.  Available in 1L and 5L. 

 

What will it Seal?

All in One Honed Sealer is idea to seal and protect all honednatural stone such as:

Marble

Limestone

Travertine

Granite

Absorbent Stone

By using the TileMaster "Active Compound Resin" Protection System, tiles are protected from dirt, grime and daily food stills with it's invisible and breathable sealer.  

 

Warning - this product does not protect stone from acid or chemical damage, surface wear or scratching.  Does not form layers or films and does not create a shine.  Always pre-test in a small area. 

 

 

Where to Use:

 

Perfect for use on floors, walls, and wet rooms and worktops in Kitchen, Hallway, Bathroom, Patio, Swimming Pool or anywhere to protect natural stone.

 

 

Benefits:

Gives excellent protection against both oil and water based stains.

Protects and seals both indoor and covered outdoor surfaces.

Easy to apply and ready-to-use.

Does not change the appearance of most surface types.

Aids maintenance and makes it easy to clean the floor.

 

How to Use:

Always pre-test product on small area first.  Allow to cure for 24hrs and check for desired results, colour change and protection level.

Check that area is dry, clean and free of all residue and previous treatments.

Evenly apply 1 generous coat of sealer to saturate the tile.  The tile should hold a wet or glass like look for about 5 seconds.  Apply more sealer if required to achieve this.

After 10 minutes, or before the sealer dries on the surface, remove and buff off any excess sealer using clean and dry white towels or cloths.  To remove stubborn residue, simply reactivate using a clean cloth, slightly wet with sealer.

For highly abosrbent stone apply a second coat after 3 hours, using steps 3 and 4 above.

The floor is fine for light foot traffic in socks and slippers after 4 hours from final coat.

Allow 48 hours before wetting the floor or contact with water or stains.

 

Coverage (rates per 1 litre per coat):

High Absorbency Honed Natural Stone: 10-15sqm

Medium Absorbency Honed Natural Stone: 15-20sqm

Floor Preservation and Ongoing Maintenance: Surfaces treated with this sealer should be maintained with TileMaster Cleaner No. 1 or No. 2 depending on surface type, diluted at 1:50 (1 cap in 5 litres of water).

 

A Safety Data Sheet is available below for download/viewing.