All Fibre Textile Rinse (5L)

Chemspec All Fibre Textile Rinse is an acid rinse to neutralise high alkaline detergents.  Now available in 5 Litres.

 

This product is especially good for stabilising possible unstable dyes i.e. oriental rugs, metalic dyes etc. Leaves fibes soft and safe wherever colour bleeding might be a problem. Use when soiling is severe and high pH detergents need to be used on wool or dyed fibres or as acid pre-spray before applying carpet protectors. NOT required following "Woolsafe" detergents providing they are used correctly.

 

Directions:

 

For Carpet and Wet-Cleanable Upholstery:

Pre-test in an inconspicuous area.
Do not mix with alkaline detergents.

 

Spray/Acid Rinse:

Mix 30ml per 3.8L of water.
Apply 3.8L ready to use per 20-50sqm depending on the pile density.
Vacuum extgract or rake into carpet.

 

Truckmount: 

Mix 946ml per 18.9L of water.
Set chemical injection flow meter at 7.6L per hour, extract.

 

 

pH @ use: 2.5-3.5

Dilution: Variable depending on use.

Coverage: Up to 1000 square metres per bottle.

Fragrance: Spice.

Colour: Clear Liquid.

 

Safety Data Sheet and Product Specification Sheet are available below to download.